notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 1 of 2 level 17 (lo power +17 dbm) 10 to 1000 mhz frequency mixer surface mount case style: cd542 demo board mcl p/n: tb-03 suggested pcb layout (pl-052) outline dimensions ( ) inch mm maximum ratings pin connections lo 6 rf 3 if 2 ground 1,4,5 outline drawing electrical specifcations rev. e m158496 ADEX-10H+ ed-9813/1 dj/td/cp/am 161024 1 db comp.: +14 dbm typ. ? conversion loss increases 0.5 db when if is above 150 mhz frequency (mhz) conversion loss (db) lo-rf isolation (db) lo-if isolation (db) ip3 at center band (dbm) lo/rf if mid-band m total range max. l m u l m u f l -f u x max. ty p. min. ty p. min. ty p. min. ty p. min. ty p. min. ty p. min. ty p. 10-1000 dc-800 7.0 0.10 8.5 ? 9.5 ? 68 55 55 40 47 31 46 30 32 20 26 13 22 a b c d e f g .272 .310 .220 .100 .112 .055 .100 6.91 7.87 5.59 2.54 2.84 1.40 2.54 h j k l wt .030 .026 .065 .300 grams 0.76 0.66 1.65 7.62 0.20 frequency (mhz) conversion loss (db) isolation l-r (db) isolation l-i (db) vswr rf port (:1) vswr lo port (:1) rf lo lo +17dbm lo +17dbm lo +17dbm lo +17dbm lo +17dbm typical performance data electrical schematic l = low range [f l to 10 f l ] m = mid range [10 f l to f u /2] u = upper range [f u /2 to f u ] m= mid band [2f l to f u /2] 10.0 40.0 7.3 74.1 50.8 1.6 1.1 22.0 52.0 7.2 71.8 48.3 1.6 1.1 40.0 70.0 7.3 69.3 45.9 1.6 1.1 52.0 82.0 7.3 68.1 44.5 1.6 1.2 70.0 100.0 7.3 66.7 42.7 1.5 1.2 88.0 118.0 7.3 66.0 41.2 1.5 1.2 94.0 124.0 7.2 65.8 40.8 1.5 1.2 100.0 130.0 7.2 65.5 40.4 1.5 1.2 160.0 190.0 7.2 61.7 36.8 1.5 1.3 220.0 250.0 7.0 58.6 34.0 1.5 1.3 280.0 310.0 7.1 56.7 32.8 1.5 1.3 400.0 430.0 7.2 57.3 32.2 1.5 1.3 460.0 490.0 7.2 53.7 31.8 1.5 1.4 520.0 550.0 7.2 50.0 31.5 1.5 1.4 580.0 610.0 7.3 49.1 30.6 1.5 1.4 700.0 730.0 7.7 45.6 29.9 1.6 1.5 760.0 790.0 7.8 44.2 28.5 1.6 1.7 820.0 850.0 7.7 41.9 26.5 1.5 1.7 940.0 970.0 7.5 36.6 23.5 1.4 1.9 1000.0 1030.0 7.4 35.4 22.5 1.3 2.0 features ? excellent l-r isolation, 55 db typ. ? excellent conversion loss fatness, 0.35 db typ. over entire band ? low conversion loss, 7.0 db typ. ? good vswr, 1.4:1 typ. for lo, 1.6:1typ. for rf, 1.4:1 typ. for if ? good performance to 1500 mhz ? aqueous washable ? protected by u.s. patents 6,133,525 and 6,947,717 applications ? cellular ? pcn operating temperature -40c to 85c storage temperature -55c to 100c rf power 200mw if current 40ma pcb la n d pa t t e r n sugges t ed l a y o ut, t ol e r a nce t o b e wi t hi n ? . 002 permanent damage may occur if any of these limits are exceeded. a vailable t ape and reel at no extra cost reel size devices/reel 7? 20, 50, 100, 200, 500 13? 500,1000 ADEX-10H+ +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 2 of 2 performance charts ADEX-10H + conversion loss 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 0 200 400 600 800 1000 frequency (mhz) conversion loss (db) lo=+14 dbm lo=+17 dbm lo=+20 dbm at if freq of 30 mhz ADEX-10H + l-r isolation 10 20 30 40 50 60 70 80 90 100 0 200 400 600 800 1000 frequency (mhz) isolation (db) lo=+14 dbm lo=+17 dbm lo=+20 dbm ADEX-10H + rf vswr 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 200 400 600 800 1000 frequency (mhz) vswr lo=+14 dbm lo=+17 dbm lo=+20 dbm ADEX-10H + l-i isolation 10 20 30 40 50 60 70 80 90 0 200 400 600 800 1000 frequency (mhz) isolation (db) lo=+14 dbm lo=+17 dbm lo=+20 dbm ADEX-10H + lo vswr 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 200 400 600 800 1000 frequency (mhz) vswr lo=+14 dbm lo=+17 dbm lo=+20 dbm ADEX-10H + if vswr 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 200 400 600 800 1000 frequency (mhz) vswr lo=+14 dbm lo=+17 dbm lo=+20 dbm ADEX-10H+
|
